EN
Products
Wax Resources
About us
Sponsor/Racing
Environment
NorwayNorsk
EnglishEnglish
USAUSA
GermanyDeutsch
RussiaPусский
Wax tip for Marcialonga 2016
Thursday 28/01-2016 -
Sunday 31/01-2016
Val di Fiemme, Italy
Cross Country Cross Country
Cloudy Cloudy
Manmade Manmade
Share

Wax tip for Marcialonga 2016

The weather forecast for race day Sunday is: Moena: cloudy, -2°C on start and rising temperatures throughout the day. Canazei: -3°C and cloudy. Val di Fiemme: -2°C in the morning, partly cloudy and rising temperatures throughout the day up to 6°C. Cavalese: 0°C in the morning, partly cloudy, from 12 am approx. +7°C. There may be some light rain later in the day.

GLIDE - easy:

  1. Iron in LF7X. Let cool off. Iron in once more and let cool off. Scrape off with a Swix Plexi Scraper, and brush with a Swix Bronze or Steel Brush.
  2. Finish with the Blue Nylon Polish Brush.

GLIDE - more experienced:

  1. Iron in one layer of HF8BW. Iron temperature approx. 140°C.
  2. Let cool off. Iron in once more and let cool off.
  3. Scrape off with a Swix Plexi Scraper, and brush with a Swix Bronze or Steel Brush.
  4. Apply Cera F FC10X powder with an iron temperature of approx. 170°C. Make one fast continuous pass with the iron with a constant pressure - take one side of the groove at the time.
  5. Wait at least 10 minutes.
  6. Brush the powder with a stiff Nylon Brush. Continue brushing the powder thoroughly away with a Horsehair or Wild Boar Brush.
  7. Finish with the Blue Nylon Polish Brush.

STRUCTURE

Use 1.0mm linear structure (T0401). This structure will give the best result in a track that becomes moist throughout the day.

Optional make a 1.0mm linear structure with a structure roller (T0406 or T0423). Use more pressure in the back of the skies. 

GRIP

For those who starts early and want a good grip we recommend:

  1. Spray on 2-3 thin layers of KB20 Base klister. Let dry for approx. 2 minutes.
  2. Apply one layer of KX35 Violet Special klister.

For late starters we recommend a softer klister on top.

  1. Spray on 2-3 thin layers of KB20 Base klister. Let dry for approx. 2 minutes.
  2. Apply one layer of KX35 Violet Special klister. Let the klister harden.
  3. Apply one layer of K22 VM Universal klister.

The conditions will change during the race when the temperature rises throughout the day. Late starters must expect to add and/or change klister during the race. We recommend to take along K22 VM Universal klister and KX65 Red klister, K65C or K70C quick klister.

Swix wish everybody a nice trip!


Recommended products

Glider - Easy

Glider - Competition

Grip - Competition