WEATHER and TEMPERATURE FORECAST RACE DAY

According to forecasts, the temperature will be below zero for almost the entire race. In Mora it can rise above zero around lunchtime.

Evertsberg
Oxberg
Mora

09:00
11:00
13:00

-5ºC
-2ºC
+1ºC

STRUCTURE

Stone ground skis: Medium structure. Remember to use hand structure on stone ground skis for better glide.

SWIX Structure Tool: 1.0 mm linear structure (imprint roller that gives straight structure) (T423). Use higher pressure on the back of the base.

GLIDE – Alternative 1

  1. Spray on CH7XL Liquid and let dry for at least 15 minutes. Apply the product in temperatures above 10°C. To obtain the best performance it’s important to allow the wax film to dry entirely.
  2. Finish with the SWIX Blue Nylon Polish Brush.

GLIDE – Alternative 2

  1. Iron in one layer of White Marathon Fluoro Free at 155°C. Let cool off. Iron in once more and let cool off. Scrape off with a Plexi Scraper, and brush with a SWIX Bronze or Steel Brush.
  2. Finish with the SWIX Blue Nylon Polish Brush.

GRIP

  1. Sand (rub) the grip zone area with #100 grit silicon sandpaper (Swix T330 or T0011).
  2. Iron in a thin layer of KX20 Green Base Klister and let the ski cool off. Alternatively apply a thin layer of KB20 Green Base Klister spray, and let dry.
  3. Apply one thin layer of KX35 klister as mid layer. Cool off. (This mid layer is recommended to increase durability. If you have soft skis you can drop this step.)
  4. Apply one final layer of KN44 NERO klister.

SKIN SKIS

If you are using skis with integrated skins we recommend to clean the skins with N16 Skin Cleaner and then use N15 Skin Care to improve the skins glide properties.